In reality, the only thing to worry about is that you’re clipping your interface.Īs long as you have a decent level you’ll be fine I try to get the level as loud as possible, but without risking it clipping – the loudest peaks hitting -6dB is a safe bet. “You must hit this dB level!”, or “No that’s wrong you need to hit this dB level!”. The Re-Amping Process (From Start To Finish) Step 1: Get Your Gain Staging Right The only situation where you don’t need a re-amp box is if you are running a digital re-amp through an Axe FX, Kemper, Helix etc. There have been plenty of times where I’ve been without a DI box and plugged directly into the interface, and you can still get really good results. I would always recommend one, and I’m not going to go into technical details why you need one, but if your interface has an instrument input that you can plug your guitar jack into, then it can get the job done. Click here for a comprehensive list of the best budget audio interfaces in 2020.
You won’t be able to get your guitar signal in and out of the computer at a good quality without one. The audio interface is one of the pieces of gear that is essential. If you don’t use new strings then your DI will sound dull, and throughout the whole process of re-amping you will struggle to get a nice bright and clear sound. The most expensive thing normally is the guitar amp which can cost thousands, but there are cheaper options out there that get the job done. Bear in mind, some of these are optional and can depend on how you like to do things. Here is a list of what’s required for re-amping.
This way you can make sure you’re going to get the best sound possible with the setup you have. It’s useful to learn about the re-amping process in this case if you intend on sending your recordings off to be re-amped.
#REAMP WITHOUT REAMP BOX PROFESSIONAL#
Those who don’t have a professional guitar amp, speaker and microphone setup are usually those who will benefit most from re-amping. You Don’t Have A Good Amp & Want To Send It Off To Be Re-Amped Re-amping gives you the freedom to record with a tone that inspires you at the time of tracking, but you can then later change the tone as you see fit for the song. Note: This is not the same as double-tracking, if you use the same take re-amped left and right you will not get the wide sound associated with double-tracking. You can do this by simply re-amping the same part with different amps to build a sound that you like. You Want To Create Stereo EffectsĪnother potential reason you might want to re-amp is that you have the perfect performance of the guitar part, but you’re looking to get a bigger or more interesting sound. It’s very easy to set up a guitar tone you like when recording, which sounds great in the room, but then when you come back to listen to it later in the mix you realise that it’s actually too bassy, too harsh, overly distorted etc. You Didn’t Get The Sound You Wanted When You First Recorded Here are some of the reasons why you might consider re-amping your guitar: 1. An example of this could be playing back a snare track into a big room and recording the reverb, as well as the obvious example of re-amping guitar tracks. You’d be right if this is your idea of re-amping, but it can actually be any recorded signal, being played back through another piece of gear in order to change the sound. You might think of it as running a guitar DI through an amp after recording it so you can change the tone or the entire amp if you decide you don’t like what sound you got initially. THIS ARTICLE WAS WRITTEN BY GEORGE TURNER, A MUSICIAN, PRODUCER AND MIXING ENGINEER OFFERING QUALITY RE-AMPING SERVICES FOR PRODUCERS AND MUSICIANS ON A SHOESTRING BUDGET.
#REAMP WITHOUT REAMP BOX HOW TO#
Learn how to polish your re-amp to make it fit perfectly in a mix.Learn some techniques for getting the most out of your equipment.Learn what re-amping is and how to best prepare for it.Disclosure: We may receive commissions when you click our links and make purchases.
0 kommentar(er)
